HD-SDI DVR
General Features
- CK7000 Series
- CK6000 Series
- CK5000 Series
- CK4000 Series
| Fiber Optic Converter : SDI (Rx) to FO (Tx) / FO (Rx) to SDI (Tx) |
| HFO 1200 receives HD-SDI and transmit the signal through Fiber optic cable. HFO 1100 receives Fiber optic cable and convert the signal into HD-SDI (SMPTE292M). |
| Features |
| · Transmission of HD-SDI over Single Mode Optical Fiber |
| · Auto-detection of Video Format |
| · HD-SDI Connector (SMPTE 292M) |
| · LC Fiber Optic Connector |
| · Free Voltage 12VDC, 1A |
| · Input / Output Return Loss : > -15 dB at 1.5GBPS |
| · Input / Output Impedance : 75 Ohms +/- 1% |
| · All inputs, either SDI or Fiber, are equalized and re-clocked |
| Key Features |
| HD-SDI Transmission Distance Extension (150m each) |
| HD-SDI device delivers Full HD video by coaxial cable and it is easy to install and convenient to use. However due to the distance limitation of HD-SDI signal transmission (150m), Fiber Optic Converter will enables the extension of the distance up to 30km. |
 |
 Back to Top |
| Model | HFO1100 | HFO1200 |
| Format | 3Gb, 1.5Gb, 270Mb Auto Detect | |
| Video Input | 1 LC Fiber Optic Connector | 1HD-SDI Input (SMPTE292) |
| Video Outputs | 1 HD-SDI Output (SMPTE292M) | 1 LC Fiber Optic Connector |
| Cable Equalization (BNC Inputs, 1694 Coax) |
270mb, 460m | |
| 1.5Gb, 230m | ||
| 3Gb, 150m | ||
| Input Return Loss (BNC) | > -15 dB, 270Mb-3Gb | |
| Output Return Loss (BNC) | > -15 dB, 270Mb-3Gb | |
| Input Impedance (BNC) | 75 Ohms +/- 1% | |
| Output Impedance (BNC) | 75 Ohms +/- 1% | |
| Optical Outputs | Wavelength:13 10 nm | |
| Output Power: -2dBm Typical | ||
| Power Consumption | Free Voltage 12VDC, 1A | |
| Dimension | 83.75mm x 31.75mm x 87.07mm / 3.35 inch x 1.27 inch x 3.48 inch | |
| * Design and specifications are subject to change without notice. | ||
| Back to Top |
||
|
|||||||||||||||||||||||||||||||||||
